delta planetary gearbox

Product Description

 

Product Description

The reducer is typically used for lower-velocity and high-torque transmission products. The motor, interior combustion motor or other high-pace operating electrical power is utilised to obtain the objective of deceleration by meshing with the massive gear on the output shaft by means of a equipment with a modest number of teeth on the input shaft of the reducer. The reducer will also have several pairs of gears with the exact same theory to accomplish the perfect reduction impact. The ratio of the variety of enamel of the large and tiny gears is the transmission ratio.
 

SPECIFICATIONS Phase RATIO RATED TORQUE (N.m)
PLF60-60mm L2
Sq. Flange Planetary Gearbox
L1 four 25
5 28
7 20
ten 10
L2 sixteen 30
20 30
twenty five 32
28 30
35 30
40 25
50 25
70 20
Adapted motor ∅ 8-14/ ∅38.1-2/∅F47.14-M4
Rated Enter Pace (rpm) 1000/min
Max Enter Speed (rpm) 2000/min
Backlash L1 ≤10 Arcmin
L2 ≤15 Arcmin
Fault cease torque(N.m) 2 times of rated torque
Efficiency L1 96%
L2 94%
Average daily life span 20000h
Operating temperature -10°~+90°
Nosie  ≤60 db
Weight (kg) L1 0.75
L2 1
IP 54
Installation technique Any installation method

 

Generation Range

Here is our all goods record. If you would like to know CZPT type of planetary gearbox, please CLICKING Photo to check out more details.  

 

42 Sequence Planetary Gearbox

Backlash: ten-15 arcmin

Ratio Selection:

L1: 4,5,7,ten,

L2: twelve,sixteen,twenty,twenty five,28,35,40,fifty,70

Body Dimension: 42mm Enter Flange

Equipment Arrangement: Planetary Straight Teeth

60 Sequence Planetary Gearbox

Backlash: 10-fifteen arcmin

Ratio Choice:
L1: 4,5,7,10,
L2: sixteen,twenty,25,28,35,40,50,70
Frame Dimension: 60mm Input Flange
Equipment Arrangement: Planetary Straight Enamel

90 Sequence Planetary Gearbox

Backlash: 10-15 arcmin
Ratio Selection:
L1: 4,5,7,10,
L2: sixteen,20,25,28,35,40,fifty,70
Frame Dimension: 90mm Input Flange
Gear Arrangement: Planetary Straight Teeth

Powder Steel Series Planetary Gearbox

Backlash: 10-15 arcmin
Ratio Assortment:
L1: 4,5,7,ten,
L2: sixteen,20,twenty five,28,35,forty,50,70
Body Dimension: 42mm & 57mm
Equipment Arrangement: Planetary Straight Enamel

Correct Angle Collection Planetary Gearbox

Backlash: ten-15 arcmin
Ratio Variety:
L1: 4,5,7,ten,

L2: 16,twenty,twenty five,28,35,forty,50,70
Body Dimension: 60mm & 90mm
Gear Arrangement: Planetary Straight Tooth

 

Application Area

Automatic Arms

 

Assembly Line

 

3D-Printer

 

Health-related -Products

 

CNC Machine

 

Tapping Machine

 

Other Automation Products

 

Why Choose Us

 

ZheJiang Higher Precision Gear Transmission Co., Ltd

 

 

 

Company Profile

 

 

ZheJiang High Precision Gear Transmission Co., Ltd found in HangZhou city, ZheJiang Province, China. It is a leading business committed in precision transmission elements and program study, manufacture and product sales, different collection of products are made in its 5000 sq. CZPT workshop, the precision planetary gearbox and gear motor are designed particularly for photo voltaic power industry and have served several huge-scale photo voltaic tasks worldwidely. 

The analysis crew has much more than fifteen a long time activities in this discipline, who can guarantee a punctual and efficient provider to meet customer’s specific demands. It has pasted the ISO9001 quality management system and CE, products have been exported to heaps of nations around the world with a wide variety application in AGV, smart robot, logistic, industrial automation, solar strength, vessel, packaging and textile and so on.Regularly, our aim is to promote the software of photo voltaic power industry in the planet, and we believe it provides cleanse and sustainable energy for humanity to greater shield our surroundings.

WORKSHOP

CERTIFICATIONS

FAQ

 

Q1:Which locations are your merchandise mainly used in?

A:At present, we have 2 main products: precision planetary equipment reducer and solar geared motor. Most of the precision planetary reducers are utilised in automation fields, this sort of as health-related products, 3D printers, door openers, tapping equipment, CNC lathes and a series of automation products. In addition, our solar geared motors are utilised in photovoltaic power technology initiatives, which are mostly mixed with rotary drives to generate solar panels to monitor daylight.
Q2: How to select the suited planetary gearbox?
A :Initial of all, we want you to be ready to provide appropriate parameters. If you have a motor drawing, it will allow us recommend a suited gearbox for you more rapidly. If not, we hope you can offer the subsequent motor parameters: output pace, output torque, voltage, present, IP, sound, functioning conditions, motor dimension and power, and so on.
Q3: What is the price ?
A : The main identifying issue for the price tag of every single product is the purchase quantity. You can talk with us and let us recognize every single other. I think that our charges, solution top quality and our providers can absolutely make you happy.

This autumn: Do you supply custom-made services?

A: Of course, we provide customized solutions. You only need to place CZPT your needs, and we will do our best to provide you with a plan, make programs, and consider our very best to meet your wants.

 

 

Application: Motor, Machinery, Marine, Agricultural Machinery, Laser Cutting Machine
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Double-Step

###

Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

SPECIFICATIONS STAGE RATIO RATED TORQUE (N.m)
PLF60-60mm L2
Square Flange Planetary Gearbox
L1 4 25
5 28
7 20
10 10
L2 16 30
20 30
25 32
28 30
35 30
40 25
50 25
70 20
Adapted motor ∅ 8-14/ ∅38.1-2/∅F47.14-M4
Rated Input Speed (rpm) 1000/min
Max Input Speed (rpm) 2000/min
Backlash L1 ≤10 Arcmin
L2 ≤15 Arcmin
Fault stop torque(N.m) 2 times of rated torque
Efficiency L1 96%
L2 94%
Average life span 20000h
Operating temperature -10°~+90°
Nosie  ≤60 db
Weight (kg) L1 0.75
L2 1
IP 54
Installation method Any installation method
Application: Motor, Machinery, Marine, Agricultural Machinery, Laser Cutting Machine
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Double-Step

###

Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

SPECIFICATIONS STAGE RATIO RATED TORQUE (N.m)
PLF60-60mm L2
Square Flange Planetary Gearbox
L1 4 25
5 28
7 20
10 10
L2 16 30
20 30
25 32
28 30
35 30
40 25
50 25
70 20
Adapted motor ∅ 8-14/ ∅38.1-2/∅F47.14-M4
Rated Input Speed (rpm) 1000/min
Max Input Speed (rpm) 2000/min
Backlash L1 ≤10 Arcmin
L2 ≤15 Arcmin
Fault stop torque(N.m) 2 times of rated torque
Efficiency L1 96%
L2 94%
Average life span 20000h
Operating temperature -10°~+90°
Nosie  ≤60 db
Weight (kg) L1 0.75
L2 1
IP 54
Installation method Any installation method

Planetary Gearbox

This article will explore the design and applications of a planetary gearbox. The reduction ratio of a planetary gearbox is dependent on the number of teeth in the gears. The ratios of planetary gearboxes are usually lower than those of conventional mechanical transmissions, which are mainly used to drive engines and generators. They are often the best choice for heavy-duty applications. The following are some of the advantages of planetary gearboxes.
planetarygearbox

planetary gearboxes

Planetary gearboxes work on a similar principle to solar systems. They rotate around a center gear called the sun gear, and two or more outer gears, called planet gears, are connected by a carrier. These gears then drive an output shaft. The arrangement of planet gears is similar to that of the Milky Way’s ring of planets. This arrangement produces the best torque density and stiffness for a gearbox.
As a compact alternative to normal pinion-and-gear reducers, planetary gearing offers many advantages. These characteristics make planetary gearing ideal for a variety of applications, including compactness and low weight. The efficiency of planetary gearing is enhanced by the fact that ninety percent of the input energy is transferred to the output. The gearboxes also have low noise and high torque density. Additionally, their design offers better load distribution, which contributes to a longer service life.
Planetary gears require lubrication. Because they have a smaller footprint than conventional gears, they dissipate heat well. In fact, lubrication can even lower vibration and noise. It’s also important to keep the gears properly lubricated to prevent the wear and tear that comes with use. The lubrication in planetary gears also helps keep them operating properly and reduces wear and tear on the gears.
A planetary gearbox uses multiple planetary parts to achieve the reduction goal. Each gear has an output shaft and a sun gear located in the center. The ring gear is fixed to the machine, while the sun gear is attached to a clamping system. The outer gears are connected to the carrier, and each planetary gear is held together by rings. This arrangement allows the planetary gear to be symmetrical with respect to the input shaft.
The gear ratio of a planetary gearbox is defined by the sun gear’s number of teeth. As the sun gear gets smaller, the ratio of the gear will increase. The ratio range of planetary gears ranges from 3:1 to ten to one. Eventually, however, the sun gear becomes too small, and the torque will fall significantly. The higher the ratio, the less torque the gears can transmit. So, planetary gears are often referred to as “planetary” gears.
planetarygearbox

Their design

The basic design of a Planetary Gearbox is quite simple. It consists of three interconnecting links, each of which has its own torque. The ring gear is fixed to the frame 0 at O, and the other two are fixed to each other at A and B. The ring gear, meanwhile, is attached to the planet arm 3 at O. All three parts are connected by joints. A free-body diagram is shown in Figure 9.
During the development process, the design team will divide the power to each individual planet into its respective power paths. This distribution will be based on the meshing condition of all gears in the system. Then, the design team will proceed to determine the loads on individual gear meshes. Using this method, it is possible to determine the loads on individual gear meshes and the shape of ring gear housing.
Planetary Gearboxes are made of three gear types. The sun gear is the center, which is connected to the other two gears by an internal tooth ring gear. The planet pinions are arranged in a carrier assembly that sets their spacing. The carrier also incorporates an output shaft. The three components in a Planetary Gearbox mesh with each other, and they rotate together as one. Depending on the application, they may rotate at different speeds or at different times.
The planetary gearbox’s design is unique. In a planetary gearbox, the input gear rotates around the central gear, while the outer gears are arranged around the sun gear. In addition, the ring gear holds the structure together. A carrier connects the outer gears to the output shaft. Ultimately, this gear system transmits high torque. This type of gearbox is ideal for high-speed operations.
The basic design of a Planetary Gearbox consists of multiple contacts that must mesh with each other. A single planet has an integer number of teeth, while the ring has a non-integer number. The teeth of the planets must mesh with each other, as well as the sun. The tooth counts, as well as the planet spacing, play a role in the design. A planetary gearbox must have an integer number of teeth to function properly.

Applications

In addition to the above-mentioned applications, planetary gearing is also used in machine tools, plastic machinery, derrick and dock cranes, and material handling equipments. Further, its application is found in dredging equipment, road-making machinery, sugar crystallizers, and mill drives. While its versatility and efficiency makes it a desirable choice for many industries, its complicated structure and construction make it a complex component.
Among the many benefits of using a planetary gearbox, the ability to transmit greater torque into a controlled space makes it a popular choice for many industries. Moreover, adding additional planet gears increases the torque density. This makes planetary gears suitable for applications requiring high torque. They are also used in electric screwdrivers and turbine engines. However, they are not used in everything. Some of the more common applications are discussed below:
One of the most important features of planetary gearboxes is their compact footprint. They are able to transmit torque while at the same time reducing noise and vibration. In addition to this, they are able to achieve a high speed without sacrificing high-quality performance. The compact footprint of these gears also allows them to be used in high-speed applications. In some cases, a planetary gearbox has sliding sections. Some of these sections are lubricated with oil, while others may require a synthetic gel. Despite these unique features, planetary gears have become common in many industries.
Planetary gears are composed of three components. The sun gear is the input gear, whereas the planet gears are the output gears. They are connected by a carrier. The carrier connects the input shaft with the output shaft. A planetary gearbox can be designed for various requirements, and the type you use will depend on the needs of your application. Its design and performance must meet your application’s needs.
The ratios of planetary gears vary depending on the number of planets. The smaller the sun gear, the greater the ratio. When planetary stages are used alone, the ratio range is 3:1 to 10:1. Higher ratios can be obtained by connecting several planetary stages together in the same ring gear. This method is known as a multi-stage gearbox. However, it can only be used in large gearboxes.
planetarygearbox

Maintenance

The main component of a planetary gearbox is the planetary gear. It requires regular maintenance and cleaning to remain in top shape. Demand for a longer life span protects all other components of the gearbox. This article will discuss the maintenance and cleaning procedures for planetary gears. After reading this article, you should know how to maintain your planetary gearbox properly. Hopefully, you can enjoy a longer life with your gearbox.
Firstly, it is important to know how to properly lubricate a planetary gearbox. The lubricant is essential as gears that operate at high speeds are subject to high levels of heat and friction. The housing of the planetary gearbox should be constructed to allow the heat to dissipate. The recommended oil is synthetic, and it should be filled between 30 and 50 percent. The lubricant should be changed at least every six months or as needed.
While it may seem unnecessary to replace a planetary gearbox, regular servicing will help it last a long time. A regular inspection will identify a problem and the appropriate repairs are needed. Once the planetary gearbox is full, it will plug with gear oil. To avoid this problem, consider getting the unit repaired instead of replacing the gearbox. This can save you a lot of money over a new planetary gearbox.
Proper lubrication is essential for a long life of your planetary gearbox. Oil change frequency should be based on oil temperature and operating speed. Oil at higher temperatures should be changed more frequently because it loses its molecular structure and cannot form a protective film. After this, oil filter maintenance should be performed every few months. Lastly, the gearbox oil needs to be checked regularly and replaced when necessary.

 delta planetary gearbox delta planetary gearbox
editor by czh 2023-03-05