China Planetary Gearbox for Stepper DC Motor small planetary gearbox

Product Description

 

Item Description

The reducer is normally employed for low-velocity and higher-torque transmission equipment. The motor, interior combustion engine or other higher-velocity working power is employed to attain the objective of deceleration by meshing with the large equipment on the output shaft by way of a equipment with a small number of enamel on the input shaft of the reducer. The reducer will also have a number of pairs of gears with the exact same theory to attain the ideal reduction impact. The ratio of the amount of teeth of the massive and little gears is the transmission ratio.
 

SPECIFICATIONS Phase RATIO RATED TORQUE (N.m)
PLF60-60mm L2
Square Flange Planetary Gearbox
L1 four 25
five 28
seven 20
ten 10
L2 16 30
20 30
25 32
28 30
35 30
40 25
50 25
70 20
Adapted motor ∅ 8-14/ ∅38.1-2/∅F47.fourteen-M4
Rated Enter Speed (rpm) 1000/min
Max Input Pace (rpm) 2000/min
Backlash L1 ≤10 Arcmin
L2 ≤15 Arcmin
Fault cease torque(N.m) 2 moments of rated torque
Efficiency L1 96%
L2 94%
Average lifestyle span 20000h
Operating temperature -10°~+90°
Nosie  ≤60 db
Weight (kg) L1 0.seventy five
L2 1
IP 54
Installation technique Any installation approach

 

Production Selection

Right here is our all items listing. If you would like to know CZPT kind of planetary gearbox, make sure you CLICKING Image to check out much more particulars.  

 

forty two Collection Planetary Gearbox

Backlash: 10-fifteen arcmin

Ratio Choice:

L1: 4,5,7,ten,

L2: 12,sixteen,twenty,25,28,35,forty,fifty,70

Frame Dimension: 42mm Input Flange

Equipment Arrangement: Planetary Straight Teeth

60 Sequence Planetary Gearbox

Backlash: 10-fifteen arcmin

Ratio Variety:
L1: 4,5,7,10,
L2: sixteen,20,twenty five,28,35,40,50,70
Body Dimension: 60mm Input Flange
Equipment Arrangement: Planetary Straight Tooth

90 Collection Planetary Gearbox

Backlash: 10-fifteen arcmin
Ratio Choice:
L1: 4,5,7,ten,
L2: sixteen,20,twenty five,28,35,forty,50,70
Frame Dimension: 90mm Input Flange
Gear Arrangement: Planetary Straight Tooth

Powder Metallic Series Planetary Gearbox

Backlash: ten-fifteen arcmin
Ratio Choice:
L1: 4,5,7,ten,
L2: sixteen,20,twenty five,28,35,forty,50,70
Body Dimension: 42mm & 57mm
Equipment Arrangement: Planetary Straight Enamel

Correct Angle Sequence Planetary Gearbox

Backlash: ten-fifteen arcmin
Ratio Variety:
L1: 4,5,7,ten,

L2: sixteen,twenty,twenty five,28,35,40,fifty,70
Body Dimension: 60mm & 90mm
Equipment Arrangement: Planetary Straight Tooth

 

Software Discipline

Computerized Arms

 

Assembly Line

 

3D-Printer

 

Medical -Tools

 

CNC Device

 

Tapping Machine

 

Other Automation Units

 

Why Decide on Us

 

ZheJiang Higher Precision Gear Transmission Co., Ltd

 

 

 

Business Profile

 

 

ZheJiang High Precision Gear Transmission Co., Ltd found in HangZhou town, ZheJiang Province, China. It is a major business focused in precision transmission elements and technique research, manufacture and revenue, numerous collection of goods are manufactured in its 5000 sq. CZPT workshop, the precision planetary gearbox and equipment motor are developed especially for solar power sector and have served numerous big-scale solar assignments worldwidely. 

The investigation team has more than fifteen several years activities in this area, who can guarantee a punctual and productive support to fulfill customer’s distinct needs. It has pasted the ISO9001 good quality administration system and CE, goods have been exported to heaps of nations around the world with a broad variety software in AGV, clever robot, logistic, industrial automation, solar power, vessel, packaging and textile and many others.Persistently, our objective is to market the software of photo voltaic energy business in the world, and we imagine it offers cleanse and sustainable vitality for humanity to greater protect our surroundings.

WORKSHOP

CERTIFICATIONS

FAQ

 

Q1:Which locations are your items primarily utilized in?

A:At present, we have 2 main products: precision planetary gear reducer and solar geared motor. Most of the precision planetary reducers are used in automation fields, this sort of as health-related tools, 3D printers, doorway openers, tapping machines, CNC lathes and a collection of automation tools. In addition, our photo voltaic geared motors are employed in photovoltaic power technology initiatives, which are primarily blended with rotary drives to generate photo voltaic panels to monitor daylight.
Q2: How to decide on the suited planetary gearbox?
A :1st of all, we want you to be ready to offer pertinent parameters. If you have a motor drawing, it will allow us suggest a suited gearbox for you quicker. If not, we hope you can provide the following motor parameters: output speed, output torque, voltage, existing, IP, noise, operating conditions, motor size and energy, and many others.
Q3: What is the value ?
A : The primary determining factor for the cost of every item is the get volume. You can converse with us and enable us realize each other. I feel that our rates, solution top quality and our services can absolutely make you satisfied.

This fall: Do you give tailored services?

A: Yes, we offer customized services. You only need to have to set CZPT your requirements, and we will do our very best to give you with a program, make strategies, and try our best to meet your wants.

 

 

Application: Motor, Machinery, Marine, Agricultural Machinery, Laser Cutting Machine
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Double-Step

###

Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

SPECIFICATIONS STAGE RATIO RATED TORQUE (N.m)
PLF60-60mm L2
Square Flange Planetary Gearbox
L1 4 25
5 28
7 20
10 10
L2 16 30
20 30
25 32
28 30
35 30
40 25
50 25
70 20
Adapted motor ∅ 8-14/ ∅38.1-2/∅F47.14-M4
Rated Input Speed (rpm) 1000/min
Max Input Speed (rpm) 2000/min
Backlash L1 ≤10 Arcmin
L2 ≤15 Arcmin
Fault stop torque(N.m) 2 times of rated torque
Efficiency L1 96%
L2 94%
Average life span 20000h
Operating temperature -10°~+90°
Nosie  ≤60 db
Weight (kg) L1 0.75
L2 1
IP 54
Installation method Any installation method
Application: Motor, Machinery, Marine, Agricultural Machinery, Laser Cutting Machine
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Double-Step

###

Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

SPECIFICATIONS STAGE RATIO RATED TORQUE (N.m)
PLF60-60mm L2
Square Flange Planetary Gearbox
L1 4 25
5 28
7 20
10 10
L2 16 30
20 30
25 32
28 30
35 30
40 25
50 25
70 20
Adapted motor ∅ 8-14/ ∅38.1-2/∅F47.14-M4
Rated Input Speed (rpm) 1000/min
Max Input Speed (rpm) 2000/min
Backlash L1 ≤10 Arcmin
L2 ≤15 Arcmin
Fault stop torque(N.m) 2 times of rated torque
Efficiency L1 96%
L2 94%
Average life span 20000h
Operating temperature -10°~+90°
Nosie  ≤60 db
Weight (kg) L1 0.75
L2 1
IP 54
Installation method Any installation method

Types, Applications, and Lubrication of Planetary Gearboxes

A Planetary Gearbox is a device that can be used in a variety of applications. Their reduction ratios depend on the number of teeth in each gear. In this article, we will discuss the types, applications, and lubrication of planetary gearboxes. Hopefully, this article will be of help to you. If not, you can check out this article and discover more about this fascinating machine. There are many different types of planetary gearboxes.
planetarygearbox

Applications of planetary gearboxes

The planetary gearbox is a popular option for applications requiring precise positioning. Applications of the planetary gearbox range from plastic machinery to agricultural equipment, from goods & personnel lifts to industrial robotics. Some of the industries that benefit from this type of gearbox include robotics, intra-logistics, robotics for industrial automation, and medical equipment. Increasing automation is also fueling the growth of the industrial planetary gearbox market in APAC.
The compact design of planetary gears makes them excellent for reducing load inertia and maximizing torque. However, some applications require additional lubrication for sustained performance or high speeds. CZPT uses CZPT in its planetary gearboxes. In addition, lubrication prevents gear wear and minimizes noise and vibration. The planetary gearbox is also easy to install, thanks to its low-mass-inertia design.
Another application of the planetary gearbox is in axles and transfer cases. The planetary gear architecture consists of a sun gear, also called the central gear, and a ring-gear with internal teeth that are concentric to the sun gear. The two gears are connected via a carrier, and the output shaft is positioned on the ring-gear carrier. The gearbox can be configured in a variety of ways, depending on the speed-ratio requirements.
The planetary gear train is similar to that of a solar system. It comprises a sun gear and two or more outer gears, ring gear and carrier assembly. In this configuration, the outer gears are connected via a carrier and a ring gear. The planet gears are in constant mesh with each other, and power applied to one of these members will rotate the whole assembly. They are a very efficient choice for many applications.

Types

There are three types of planetary gearboxes, depending on their performance and efficiency. The basic model is highly efficient and transmits up to 97% of power input. Depending on the speed and torque that need to be transmitted, planetary gearboxes are used in many different applications. A planetary gearbox can reduce the speed of a roller or produce a more precise level of movement. Using a planetary gearbox for your printing press, for example, will maximize your gear transmission ratio.
This market research report analyzes the factors influencing the market for Planetary Gearboxes, as well as their sales and revenues. It also highlights industry trends and details the competitive landscape. It also provides a comprehensive analysis of the Planetary Gearbox industry and its drivers and restraints. It provides detailed information on the market size and future growth prospects. The study also includes an extensive discussion of the competitive landscape, identifying the top companies and key market players.
A planetary gearbox is often used to manufacture complicated machines. These gears are usually made of high-quality steel, which makes them extremely durable. Planetary gearboxes can also be used in the production of heavy machine elements. There are many benefits of a planetary gearbox, including its compactness and low mass inertia. The main advantage of a planetary gearbox is its ability to distribute torque. Compared to a normal gearbox, planetary gearboxes can provide torque that is nearly three times higher than its conventional counterpart.
The three main types of planetary gears are the single-stage, compound, and multi-stage. The general concept of a planetary gear is referred to as a compound planetary gear. This means that planetary gears are made up of one of these three basic structures: a meshed-planet structure, a shaft, and a multi-stage structure. This type of gear has multiple stages and is particularly useful for fast-dynamic laser cutting machines.
planetarygearbox

Design

A planetary gearbox is similar to a car’s transmission. All of its gears must have a certain number of teeth and be spaced equally apart. The teeth of a planet must mesh with the gears of the ring and sun to be functional. The number of teeth needed will depend on the number of planets and their spacing. This equation is a good starting point for designing a gearbox.
The dynamic properties of planetary gears are investigated using a parametric model. The stiffness of the mesh changes as the number of gear tooth pairs in contact varies during the gear rotation. Small disturbances in design realizations cause nonlinear dynamics, which results in noise and vibrations in the gear transmission. A mathematical system describing this process is developed using the basic principles of analytical mechanics. This mathematical model can be used to optimize any planetary gear.
This analysis assumes that the sun gear and planet gears have the same design modulus, which is a fundamental requirement of any mechanical gear. In reality, the ratio of these two gears is 24/16 versus -3/2. This means that a planetary gearbox’s output torque is 41.1 times the input torque. Considering this factor, we can make an accurate estimate of the total torque. The planetary gears are mounted face-to-face and connected to an electric motor.
A planetary gear set has to have a certain number of teeth that are odd or even. One way to overcome this issue is to double the number of teeth on the sun gear and the annulus gear. This will also solve irregularities. Another way to design a planetary gear set is to use the appropriate diametral pitch and module. There are many planetary gear sets available on the market, so it pays to understand the differences.

Lubrication

Lubrication for Planetary Gearboxes is important for the smooth functioning of the gear. Planetary gears are subjected to high levels of friction and heat, so they require regular lubrication. The gear housing is designed to dissipate heat away from the gear, but heat can still enter the gear, which can result in a poor lubrication condition. The best lubrication solution is synthetic oil, and the gear should be refilled with a minimum of 30 percent oil.
When lubricating a planetary gearbox, it is important to note that hydraulic oil is not suitable for planetary gearboxes, which cost over $1500. Hydraulic oil does not have the same viscosity and behavior with temperature fluctuations, making it less effective. The planetary gearbox may also overheat if a hose is not provided for case draining. A case drain hose is essential to prevent this from happening, because hot oil can cause overheating of the gearbox and damage to the gears.
Oil delivery conduits are positioned between each pair of planet gears. Each oil delivery conduit directs fresh oil toward the sun gear and the planet gear. The oil then disperses and exits from the gear train with considerable tangential velocity. The oil is redirected into a collection channel (56). The preferred embodiment uses herringbone gears, which pump oil axially outward into the channels.
The best way to choose the right type of lubrication is to consider its viscosity. Too high a viscosity will prevent the lubricant from flowing properly, which will cause metal-to-metal contact. The oil must also be compatible with the gearbox temperature. A suitable viscosity will increase the efficiency of the gearbox and prevent downtime. A reliable gearbox will ultimately result in higher profits and fewer costs.
planetarygearbox

Applications

This report examines the Industrial Planetary Gearbox Market and its current trends. It identifies the pre and post-COVID-19 effects of the industry. It outlines the advantages and disadvantages of the industrial planetary gearbox market. The report also explains the diverse financing resources and business models of the market. It includes the key players in the industry. Hence, it is essential to read this report carefully.
The report includes analysis and forecasts of the global market for planetary gearbox. It includes the product introductions, key business factors, regional and type segments, and end-users. It covers the sales and revenue of the market for each application field. The report also includes the regional and country-level market data. It also focuses on the market share of the key companies operating in the industry. It covers the competitive scenario in the global planetary gearbox market.
Another popular application for planetary gearboxes is in the toy industry. It is possible to design toys that look stunning with planetary gear systems. In addition to toys, clock makers also benefit from the planetary arrangement. In addition to producing a good-looking clock, this gearbox can reduce inertia and improve its efficiency. The planetary gearbox is easy to maintain, which makes it a good choice for clock applications.
In addition to traditional gear reductions, planetary gears are also used for 3D printing. Their huge gear ratio makes 3D printing easier. Furthermore, planetary gears are used to drive stepper motors, which turn much faster and produce a desired output. There are numerous industrial uses for planetary gearboxes. This article has explored a few of the most common ones. And don’t forget to explore their uses.

China Planetary Gearbox for Stepper DC Motor     small planetary gearboxChina Planetary Gearbox for Stepper DC Motor     small planetary gearbox
editor by czh 2023-03-24